Helmet Reviews - Standards

Choosing Helmet by Helmet Stuff.com

Choosing a Motorcycle Helmet

While color, design and price may be a part of your decision aboutwhich helmet to buy, think first about protection and comfort. A full-face helmet gives the most protection since it covers more of yourface.It usually has a moveable face shield that protects the eyes whenit is closed. Racers prefer full-face helmets for the added protectionand comfort.A three-quarter, open-face helmet is also a choice of some riders. It isconstructed with the same basic components, but doesn't offer theface and chin protection of full-face helmets. If you use an open-facehelmet,you should have a snap-on face shield in place when you ride,or buy a pair of goggles that can withstand the impact of a stone orother debris. Prescription eyeglasses or sunglasses are not sufficientprotection, and they might move or fly off.A “shorty”half-helmet protects even less of your head.It is more likelyto come off your head upon impact. Therefore, “shorty”, half-shellhelmets are not recommended.A lot of good helmets are available today, in a range of prices.

Choosing a Motorcycle Helmet

One look around your dealer's helmet display will convince you that nearlyany decoration you could want on a helmet is already available.

Many manufacturers are color-coordinating their helmets with the newestmotorcycle models. And the days of heavy or cumbersome helmetsare over. They’re made of lightweight, modern materials and areimproved each year.

Helmet Manufacturers are also working to make themless expensive, stronger and more comfortable.

What you must know when choosing a helmet is that it meets minimum safety standards.

The way to find a well-made, reliablehelmet is to look for the DOT and/or Snell sticker on the inside oroutside of the helmet.The sticker means the helmet meets the safetytest standards of the U.S. Department of Transportation and/or theSnell Memorial Foundation.Each organization has rigid procedures for testing:Impact – the shock-absorbing capacity of the helmet.Penetration – the helmet's ability to withstand a blow from a sharp object.Retention – the chin strap's ability to stay fastened withoutstretching or breaking.Peripheral vision – the helmet must provide a minimum sidevision of 105 degrees to each side.(Most people's usableperipheral vision is only about 90 degrees to each side.)Since 1980, ALL adult-sized helmets for on-highway use must meetDOT standards. Helmet dealers and distributors must ensure that allthe helmets they sell bear the DOT sticker. Whatever your helmetchoice, be sure it has this certification. You don't want an inferiorhelmet or one designed for another purpose. If someone tries to sellyou one without it, don't buy it. If your helmet has no DOT sticker, donot wear it, regardless of its age.Snell has been testing helmets since the 1950s. The use of Snellstandards by helmet manufacturers is voluntary. Unlike DOTstandards, Snell testing is revised (most recently in 2000) as helmetdesign and technology improve.Both agencies attempt to reproduce,under test conditions,the situa-tions that are hazardous to motorcyclists.Their testing methods differ,but the intent is the same: to make certain any helmet they approvehas life-saving, shock-absorbing minimums.Basic ConstructionProtective/Comfort AttributesSee and be seen. Be prepared. Enjoy the ride.Impact-absorbing linerRigid outer shellComfort/fit paddingFace shieldAdditional faceprotectionComfort/fitpaddingRetention systemProtects head by the shelldispersing energy and the linerabsorbing impactProtects eyes and facefrom debris andwindblast; permitsgood visionRefines hearing,cuts wind noiseProvides comfort fromenvironmental conditionsFastened retention systemsecures helmet to headinchescmHat Size21 1/4546 3/421 5/854.96 7/82255.9722 3/856.87 1/822 3/4a57.87 1/423 1/858.77 3/823 7/860.67 5/824 1/461.67 3/423 3/462.97 5/8
--------------------------------------------------------------------------------
Page 4
Helmets WorkMost activities have their own suitable protective gear andequipment. Motorcycling is no exception. Every rider and passengershould wear over-the-ankle footwear, long pants, a long-sleevedjacket,full-fingered motorcycle gloves,and a helmet manufactured tomeet DOT (U.S.Department of Transportation) standards.Helmets work. Helmet effectiveness has been confirmed by respon-sible studies,while helmet myths – “helmets break necks,block visionand impair hearing” – have been consistently disproved. Safety-conscious riders wear helmets by deliberate choice every time theyride; we know that you will, too.What a Helmet Does for YouFirst, it is the best protective gear you can wear while riding a motor-cycle.Think of it at the same time you think of your ignition key: Pickup the key; pick up the helmet.They go together. Helmet use is not a“cure-all” for motorcycle safety, but in a crash, a helmet can helpprotect your brain, your face, and your life.Combined with other protective gear,rider-education courses,properlicensing and public awareness, the use of helmets and protectivegear is one way to reduce injury.You hope you never have to “use” your helmet, just like you hope youwon't ever need to“use”the seatbelt in your car.But crashes do happen.We can't predict when or what kind they will be.You should not say toyourself,“I'm just running down to the store,”and not wear your helmet.In any given year,a lot of people make good use of seatbelts,and a lotof riders give thanks that they were wearing helmets.Second, a good helmet makes riding a motorcycle more fun, due tothe comfort factor: another truth. It cuts down on wind noise roaringby your ears; on windblast on your face and eyes, and deflects bugsand other objects flying through the air. It even contributes tocomfort from changing weather conditions and reduces rider fatigue.Third, wearing a helmet shows that motorcyclists are responsiblepeople; we take ourselves and motorcycling seriously. Wearing ahelmet, no matter what the law says, is a projection of your attitudetoward riding. And that attitude is plain to see by other riders andnon-riders alike.How and Why a Helmet WorksDifferent helmets do different things. There are hard hats onconstruction and heavy-industry heads;football helmets on athletes’heads,and Kevlar® caps on military heads.None are interchangeable.Motorcycle riding helmets are very sophisticated and specialized forthe activity.They've been developed carefully and scientifically overthe years.Four basic components work together to provide protection inthe motorcycle helmet:an outer shell; an impact-absorbing liner;the comfort padding; and a good retention system.What we see first is the outer shell, usually made from some familyof fiber-reinforced composites or thermoplastics like polycarbonate.This is tough stuff, yet it's designed and intended to compress whenit hits anything hard.That action disperses energy from the impact tolessen the force before it reaches your head, but it doesn't act aloneto protect you.Inside the shell is the equally important impact-absorbing liner,usually made of expanded polystyrene (commonly thought of asStyrofoam). This dense layer cushions and absorbs the shock as thehelmet stops and your head wants to keep on moving.Both the shell and the liner compress if hit hard, spreading the forcesof impact throughout the helmet material. The more impact-energydeflected or absorbed, the less there is of it to reach your head and do damage. Some helmet shells delaminate on impact. Others maycrack and break if forced to take a severe hit;this is one way a helmetacts to absorb shock. It is doing its intended job. Impact damagefrom a crash to the non-resilient liner may be invisible to the eye; itmay look great, but it probably has little protective value left andshould be replaced.The comfort padding is the soft foam-and-cloth layer that sits nextto your head. It helps keep you comfortable and the helmet fitting snugly. In some helmets, this padding can even be taken out for cleaning.The retention system, or chin strap, is very important. It is the onepiece that keeps the helmet on your head in a crash. A strap isconnected to each side of the shell.Every time you put the helmet on,fasten the strap securely.It only takes of couple of seconds.To ridewithout your helmet secured would be as questionable as drivingwithout your seatbelt fastened.Cycle Safety InformationWhat You Should Know About Motorcycle HelmetsThe Motorcycle Safety Foundation is a national, not-for-profit organization promoting the safety of motorcyclists with programsin rider training, operator licensing and public information. For theBasic or Experienced RiderCourseSMnearest you,call the national toll-free telephone number: (800) 446-9227. The MSF is sponsored bythe U.S. distributors and manufacturers of BMW, Ducati, Harley-Davidson, Honda, Kawasaki, Piaggio/Vespa, Suzuki, Victory andYamaha motorcycles.The information contained in this publication is offered for thebenefit of those who have an interest in riding motorcycles. Theinformation has been compiled from publications, interviews andobservations of individuals and organizations familiar with the useof motorcycles, accessories and training. Because there are manydifferences in product design, riding styles; and federal, state andlocal laws, there may be organizations that hold differing opinions.Consult your local regulatory agencies for information concerningthe operation of motorcycles in your area. Although the MotorcycleSafety Foundation will continue to research, field test and publishresponsible viewpoints on the subject, it disclaims any liability forthe views expressed herein.Revised and Reprinted February 20022 Jenner Street,Suite 150Irvine,CA 92618-3806(949) 727-3227 • www.msf-usa.orgIt is not wise to store helmets near gasoline, cleaning fluids, exhaustfumes,or excessive heat.These factors can result in the degradation ofhelmet materials, and often the damage goes unnoticed by thewearer. Read the information that comes with the helmet so youknow how to care for it.Definitely read the instructions about painting, decorating,pinstriping, or applying decals to your helmet.Never hang your helmet on the motorcycle's mirrors, turn signals, orbackrest.The inner liner can easily be damaged from such handling.In fact, avoid carrying a spare helmet on your motorcycle, unless it'swell protected or on your passenger's head. Even the bumps andjarring from normal riding can damage a spare. If it is strapped nearhot engine parts or exhaust pipes, the inner liner may distort or meltat the hot spot. The outer shell may not show the damage, but ifyou've seen the effects of a foam drink cup placed too near excessiveheat, you can understand what happens.When you take your helmet off,find a flat,secure place for it.You couldset it on the ground,secure it on a rack,or stow it on a shelf.On somebikes, putting it on the fuel tank may expose it to fumes. If you placeit on the seat, make sure it won't fall off.If you plan to use a CB radio when you ride,find a model that doesn'trequire drilling speaker holes in the outer shell. Before you purchaseyour speakers, check with your state's laws regulating their use inhelmets.Some states prohibit them.Replacing Your Helmet Replace your helmet if it was involved in a crash;it probably absorbedsome impact shock. Some helmet manufacturers will inspect and,when possible,repair a damaged helmet.If you drop your helmet andthink it might be damaged, take advantage of this service.Most helmet manufacturers recommend replacing your helmet everytwo to four years. If you notice any signs of damage before then,replace it sooner.Why replace your helmet every few years if it doesn't appeardamaged? Its protective qualities may deteriorate with time andwear. The chin strap may fray or loosen at its attaching points; theshell could be chipped or damaged. The best reason is that helmetskeep improving. Chances are that the helmet you buy in a couple ofyears will be better – stronger, lighter, and more comfortable – thanthe one you own now.It might even cost less!Can't remember when you bought your present helmet? Check thechin strap or permanent labeling. Since 1974, all helmets must havethe month and date of production stamped on it.If there's no date atall, you should definitely replace your helmet – now!State Helmet Requirements ReflectivityMany states require a specific amount of retroreflective material on ahelmet. Thoroughly read the manufacturer's information. Your localmotor-vehicle department can give you exact information on thelocation and number of square inches of retroreflective materialrequired in your state.Helmet LawsWearing a helmet properly strapped on your head is mandatory inmany states. Laws are always changing, so double-check with thestate department of motor vehicles for the most current information.Are you planning a tour through several states? Plan to wear yourhelmet in all states, regardless, and remember that laws apply totravelers as well as residents. Don't leave home without the infor-mation you need.Getting More Information You've now read that there are many things to consider when buyinga helmet. Get all the information you can. Contact helmet manufac-turers and read their literature. Consult recent motorcycle-enthusiastmagazines for up-to-date information to help in your decision. Twoauthorities you may contact are:National Highway Traffic Safety AdministrationOffice of Traffic Injury Control Programs400 Seventh Street, SW, Room 5130Washington, D.C.20590(202) 366-4913; www.nhtsa.dot.gov/Snell Memorial Foundation, Inc.3628 Madison Avenue, Suite 11North Highlands, CA 95660(916) 334-5073; www.smf.org; info@smf.orgWhile gathering information on protecting your head, why not getgood tips on other personal protective gear? Read MSF’s CycleSafety Information (CSI) sheet, “Personal Protective Gear for theMotorcyclist,”available from the MSF at no charge.Wear your helmet, every time you ride.